What are the key points of industrial finned tube radiator selection? The industrial finned tube radiator is the main equipment in the heat exchange device such as cooling air with refrigerant, heating air with heat medium, or recovering air waste heat with cold water. The air can be heated by feeding high temperature water, steam [...]
Aluminum Finned Tubes for Air Cooled Heat Exchanger Aluminum finned tubes? Aluminum Finned Tubes for Air Cooled Heat Exchanger How is it handled, generally? Simply put, in terms of aluminum fins, it refers to adding metal sheets with strong thermal conductivity to the heat exchange device to make them larger, thereby increasing the heat transfer [...]
Introduction of serrated high frequency welded finned tube High-frequency welding serrated finned tube is to open the teeth of the steel strip before high-frequency welding of the fins, and then use the skin effect of high-frequency current to weld the serrated steel strip to the steel pipe at high temperature. The finned tube produced by [...]
What are the structural characteristics of the Customized Bend Extruded finned tube heat exchanger? Customized Bend Extruded finned tube are used to enhance the boiling heat transfer of the shell-side medium. The base tube is made of ordinary light heat pipe and rolled by rolling process without cutting. The U-shaped finned tube is formed by [...]
The use of heating coils on stainless steel tanks Heating coils can be designed to be installed in new air handling units as gas heating coils or on ducts as duct heaters. When the existing heating system using unit supply air is planned to cancel the central boiler room and become independent gas heating, the [...]
Wide application of finned tube radiators The heat medium (steam or hot water) of the heating system transfers heat to the room mainly by convective heat transfer (convection heat transfer is greater than radiation heat transfer) through the wall of the cooling device. This cooling device is commonly known as a convection radiator. The convection [...]
Heat Exchanger Fin Tube SA179 SMLS OD:25mm THK:3mm LG:5970mm SA179 SMLS finned tubes for heat exchanger,air cooler Base tube material: SA179 SMLS 25mmOD*3mmTHK*5970mmLG Fin Material: AL1060; OD57.15mm X 10FPIX 0.4 mm THK Manufacturing Process: Finned tube is composited with iron-aluminum or copper-aluminum tube rolling out the fin, which feathers are tightness, small heat resistance, good [...]
The higher the fins of the finned tube,the better the heat dissipation The higher the fins of the finned tube, the better the heat dissipation 1. When the heat transfer area of the fins of the finned tube radiator is doubled, the heat transfer coefficient cannot be doubled, but a discount, generally (0.9---0.7), and the [...]