Manufacturing Process:
G Type Embedded Finned Tube is that the fin strip is tension wound and placed in the groove cut into the tube with appr, 0.4mm
groove depth, then the bottom of the fin is guided into the groove and backfilled with base tube Firmly, finally lock the fins in
place by rolling the grooves enclosed in the bottom of the fins.Embedded Finned Tube is combined with two different materials
Core tube material: carbon steel, low alloy steel, stainless steel, brass, copper, copper-nickel alloy, aluminum bronze, nickel
alloy.
1. Carbon steel: A179, A192, SA210 Gr A1/C, A106 Gr B
2. Stainless steel: TP304/304L, TP316/TP316L/316Ti, A789 S31803/S2205
3. Copper: UNS12200/UNS14200/UNS70600, CuNi70/30, CuNi 90/10
Fin material:
1. Aluminum (Alu.1100, Alu.1060)
2. Copper.
3. SteelQuality Control for Embedded Finned Tube
Inspection and Tests Performed
Chemical Composition inspection,
Mechanical Properties Test(Tensile Strength, Yield Strength, Elongation, Flaring, Flattening, Hardness, Impact Test),
Surface and Dimension Test,
No-destructive Test,
Hydrostatic Test.Delivery condition:
Tube ends are square cut, free burrs, internally dried and air blown clean, externally coated with varnish at both ends of G-Fin
Embedded Finned Tube.Acceptance Criteria
API Standard 661 (Air-Cooled Heat Exchangers for General Refinery Service) or Delivery Conditions (TDC).Features of G Type Finned Tube for Heat Exchanger
1. High heat transfer performance and small contact thermal resistance.
2. The contact area between the fin and the tube is large, and the fit is tight and reliable.
3. Good resistance to atmospheric corrosion and stable long-term use
4. Can be used for a long time at high temperature

Application of G Type Finned Tube for Heat Exchanger
●Petroleum, chemical and petrochemical industries
●Natural gas treatment
●Steel industry: blast furnace and converter system
Power generation: exhaust gas from steam turbine condenses, condensate water contact circulation cooling condensate, fossil and
nuclear power plants
● Air conditioning (Freon, ammonia, propane)
●Waste incineration equipment
●Compressor cooler, etc.
Maximum operating temperature of KL Type Finned Tube up to 400°C