Stainless Steel KL Finned Tube for Heat Exchanger L/LL/KL Finned Tube Product Description: - KL Finned Tube(Knurled Aluminum Tubing) Produced same like L-TYPE but before application of fins the surface of base tube is knurled. The fin foot is knurled into the knurling to get a higher bond between tube and fins, resulting in better heat [...]
Be.Tube Srl offers different finned tubes: tension wound finned tubes, embedded finned tubes and extruded finned tubes. Tension wound finned tubes are formed by winding a strip made of aluminium or copper around the tube under tension. The strip winding technology provides different types of fins: L-Fin, LL-Fin, KL-Fin. Embedded fins (G-Fins) are made by [...]
Low Finned tube is a finned tube obtained through plastic cold deformation. The method consists in realizing, from a smooth tube, fins with a particular geometric form without removing material; this plastic deformation causes an increment of heat exchange efficiency, and allows to reduce the heat exchanger size. Low Fin Tubes: Low Fin Tube Tube [...]
Features of finned tubes for low temperature gas saving The finned tube heat exchanger is one of the earliest and most successful discoveries in the process of improving tube heat exchange. This method is still the most widely used method among all kinds of tube heat exchange surface enhancement heat transfer methods. It is not [...]
HFW sprial SERRATED fin tubes apply in HEAT RECOVERY STEAM GENERATOR Base tube material: SA192 OD31.8mm X3.2mmTHK X1760mm LG Fin Material: CS 12.7mmHx0.8mmTHKx300FPM Application: The High Frequency Resistance Welded Helical Fin Tubes are widely applied in fired heaters, heat exchanger, boilers, economizers, pre-heaters, heat pipes, heaters etc… Capacity: Seven ERW High Frequency fining lines, daily capacity around 50 tons,length≤28meters; Serrated Fin [...]